We retested the right way after a closer inspection of the instructions. Take the hinge leaves and the stripped deck screws.
But the funny thing is, the tool worked better when we had it backwards. The cutter carves a hole, you flip it around, and the extractor digs up the fastener. The GRABIT and Drill-Out are two-sided, with a cutting head on one end and an extracting head on the other.
#Grabit screw remover full#
In the interest of full disclosure, we must confess that in our first tests, we mixed up the two ends of the tool. These tools went one for four-doesn't sound great, but when you're stuck with a fastener that's impossible to remove, getting even one out of there is better than nothing. To be fair, there's no easy way to deal with a flush-driven stripped screw. Removing new steel screws from hinge leaves, pulling broken, rusted bolts from a lawnmower, extracting stripped galvanized screws from a screen door, and attempting to yank stripped decking screws from weather-beaten, pressure-treated lumber. "If you can use a drill, you can use a GRABIT." The Test:
The Drill-Out does the same for broken bolts. Flip the tool around, drive it in reverse, and the extracting head bites the cone to remove the screw. Drill out the damaged area with a cone-shaped cutting end to form a divot. Well, not anymore!" The GRABIT damaged screw and bolt remover extracts problem fasteners in 10 seconds. Small screws, such as the mentioned fitting screws in furniture construction and many so-called safety screws can be unscrewed up to a thread diameter of 3 mm with the screw extractors of the GRABIT MICRO series."If you've ever stripped a screw or broken off the head of a bolt, you know how frustrating that can be.
#Grabit screw remover professional#
Due to the longer service life of the left-hand screw extractors, this series is also suitable for use in the professional sector.
#Grabit screw remover pro#
In this case, the GRABIT screwdriver (or GRABIT MICRO) will help.įor defective screws made of harder material, such as alloy steel, we recommend the GRABIT PRO screw extractor set, where the extractors are made of specially hardened tool steel. Brass screws are often used in furniture making for fastening fittings, but are known to be damaged very quickly. The screw extractors of the standard series GRABIT are especially suitable for damaged screws made of softer metals, such as iron, brass or aluminium. Which brand should ultimately be used depends on the hardness of the damaged screws. With the MICRO GRABIT, small specimens of the so-called safety screws can also be unscrewed without the necessary screwdriver - but are destroyed in the process. Rounded screw heads of all kinds (including Pozidriv, Phillips, slotted, hexagon socket, Torx and Tri-Wing screws) in diameters up to 24 mm are no longer a problem. The GRABIT and GRABIT PRO screw removers, made of high-alloy and hardened tool steel, are available in sets of different sizes and can be used to unscrew most broken screws. Damaged screws up to a thread diameter of 12 mm can be easily removed with the screw extractors from the manufacturer Boa.